Insulating Render HEIDELBERGER PT 600
Exterior Substrates |
Products |
Nominal thickness |
Applications
|
SOLUTION 200 |
|||
Masonry |
PT200 & finish | 14mm |
All masonry surfaces |
| PT200 (1 coat sponged) | 12mm |
Landscape walls |
|
Lightweight concrete |
PT200&finish | 14mm |
All AAC surfaces eg: Hebel, Thermalite |
Lath/mesh |
lath/PT 200&finish | 21mm |
Traditional 3 coat work over rigid and non rigid backing |
SOLUTION 300 |
|||
Polystyrene block or sheet |
PT 300/PT 320/ fiberglass mesh&finish | 8mm |
Insulform, Superform type surfaces, sheet clad structures and decorative EPS |
Precast concrete/ painted surfaces |
PT 300/PT 200&finish | 2-3mm |
Tilt slab, cast in situ concrete Straightening required to precast surfaces |
SOLUTION 325 |
|||
Fibre-cement sheet 4.5-6mm |
PT 325/PT 320&finish | 12mm |
Direct bond to fibre-cement sheet |
SOLUTION 350 |
|||
Fibre-cement sheet 7.5mm |
PT351/70mm mesh width PT350&finish |
2-5mm |
Direct bond to fibre-cement sheets |
Insulation |
|||
SOLUTION 600 |
|||
Masonry |
PT600/SK15&finish | as required |
Breathable insulating plaster |
Fibre-cement sheet |
Lath/PT600/SK15&finish | as required |
|
SOLUTION 400 |
|||
Block/Gib/lath/ fibre-cement sheet |
PT400 | as required |
Traditional gympsum whiteset |
SOLUTION 451 |
|||
Polystyrene/precast/ painted surfaces |
PT451/mesh/PT400 |
8mm |
Traditional gypsum whiteset with bonding coat |
